Grade 70 Transport Chain: Specifications, Sizes, Safety Tips, and Attachments

Transport chain is essential if you plan to haul heavy duty cargo or equipment. Grade 70 chain is the ideal transport chain since it’s made with carbon steel that’s heat treated to create additional strength.

When purchasing Grade 70 chain, look for these specifications:

  • Meets or exceeds safety regulations set by the Department of Transportation (DOT).
  • Meets or exceeds safety regulations set by the National Association of Chain Manufacturers (NACM).
  • Chains and attachments such as clevis hooks should be stamped with a “G70” for easy identification.

Chain sizes
Short link transport chain is generally available in three widths: 3/8″, 5/16″, and 1/2″ widths, Lengths are usually anywhere from 16 to 25 feet. If your job requires a direct ratchet connection, an 18″ chain connection is generally a good choice.

Safety tips for using transport chain:

  • Do not exceed specified working load limits of the chain and accessories.
  • Inspect chain before each use to look for any visible signs of damage or wear to the links.
  • Inspect attachment points and any hook or other attachments for signs of wear.
  • Always calculate the number of chains needed to transport your cargo safely.

Transport chain attachments and accessories

Chain Binders

What is a chain binder?

Also called a load binder, chain binders are a device to tighten chain when securing a load for transport. There are two general styles of chain binders –  ratchet binder and lever binder. The method of tightening the binder is what differentiates the two.

Ratchet Binder

  • Uses a ratcheting action to create tension in the chain.
  • Also called a ratchet load binder or simply a ratchet chain, it consists of two tension hooks on each end and handle.
  • Because ratchet binders are designed with a gear, handle, pawl, and end fittings, it will not store as much energy in the handle like a lever binder will.
  • A ratchet-type binder is easier to adjust in finer increments without the recoil or snap back effect of a lever binder.

Lever Binder

  • Uses a leverage action to create tension in the chain and stores kinetic energy in its handle.
  • Also called a lever chain, lever load binder, or snap binder, it has a tension hook on each end.
  • This type of chain binder generally requires more strength to tighten it.
  • Lever binders are generally easier to install because it has fewer moving parts.

Both lever binders and ratchet binders work similarly, and should be chosen based on operator preference.

What are the different sizes for chain binders and how do I choose?

Two measurements determine the size of a lever binder or ratchet binder, but let’s first outline chain grade.

There are two main grades of chain for tie-down applications:

Grade 43 high test chain is used for stationary, non-transport tie downs.

Grade 70 transport chain is for objects being transported on a flatbed or other moving vehicle.

Each binder can be used with either size of equipment chain for the appropriate application, but since the different grades have different load limits each binder will be marked with the appropriate chain dimensions for both types of chain for proper performance. The first measurement (smaller) identifies the Grade 70 chain dimension, the second measurement (larger) identifies the Grade 43 chain size required.

Keep the weakest link theory in mind to maximize your working load limit: choose a work load limit equal to or greater than the chain.
Example:

image of lever binder

5/16″ – 3/8″ Lever Binder.

The 5/16″ specifies the chain binder can be used with 5/16″ Grade 70 Transport Chain or it can be used with 3/8″ Grade 43 High Test Chain.

Small binders can technically be used for both 5/16″ or 3/8″ chain in either grade, but if you pair one with 3/8″ Grade 70 transport chain the binder will be weaker than the chain, making the binder the weakest part of the assembly. If you are working with 3/8″ Grade 70 chain, the best choice is to pair it with a 3/8″ – 1/2″ chain binder so that binder and the chain are of equal strength.

Chain binders should have the size, break strength, and working load limit marked on the handle for easy identification.