How to Use an Endless Cam Buckle Strap

Like ratchet straps, cam buckle straps are great for securing a load. But the method of tightening with a cam buckle strap makes it less likely that you’ll over-tighten and damage cargo. Cam buckles are tightened by pulling the strap rather than with a ratcheting action, so the strap can be tensioned only as tight as your strength allows.

Cam straps are ideal for securing cargo on a pallet, trailer, or in a truck, but they’re also a great all-purpose strap for use around the home, shop, garage, farm, etc. An endless cam buckle strap is a one-piece design so it’s easy to use and to store.

The strap featured in the video below is a 1″ x 15″ endless cam buckle strap, but custom sizes and widths are available by calling our sales team at 866-444-9990.

How to Thread Ratchet Straps and Cam Buckle Straps

While both ratchet straps and cam buckle straps are used to haul various types of cargo and come in sizes ranging from 1″ to 4″ in width, there are some key differences between the two.

Ratchet straps

A ratchet strap is available with many different fittings: chain extension, d-ring, e-track fitting, e-track double stud fitting, f-track hook and spring e-fitting, flat hook, flat snap hook, j-hook with d-ring, s-hook and vinyl coated wire hook.

Polyester webbing is most often used for both ratchet straps and cam buckle straps because it has a low stretch rate and is very resistant to abrasion.

How to thread a ratchet strap

1.) Open the ratchet so you have access to the take-up spool.

2.) Slide strap through the spool and bring it right back on itself.

3.) Pull on the strap to remove the excess slack.

4.) Once the slack is removed, you can start to ratchet the strap to the desired tension, keeping the strap straight.

5.) Once you have reached your desired tension, lock the ratchet down to its closed position.

To release the strap, open the ratchet all the way so it is completely flat and pull the strap out.

In cases where you do not need the strength of a ratchet strap, a cam buckle is an excellent choice. Cam straps are also available with various types of attachment hardware: butterfly fitting, e-track fitting, F-track hook and spring e-fitting, handle bar strap with S-hook, flat snap hook and s-hook.

Cam buckle straps 

Cam buckle straps typically come in 1″ and 2″ sizes. This video highlights the differences between ratchet straps and cam buckles and also shows how to thread a cam buckle.

How to thread a cam buckle strap

1.) Turn the cam buckle over and thread your strap back through  while pressing the thumb release.

2.) While pressing the thumb release, pull the strap to your desired tension and then release.

To release the strap, press the thumb button and simply pull the strap.

In choosing between a ratchet strap and a cam buckle, it generally depends on work load limit or how fragile the product is that you are securing. If the cargo is light and fragile, go with a cam buckle since you cannot run the risk of over-tightening and crushing the product. For items heavier or more sturdy, a ratchet strap is a good choice.

How & when to use ratchet straps and cam buckle straps

This video details the difference types of ratchet strap fittings, how to use a ratchet strap, and how ratchet straps and cam buckle straps are different.

Ratchet straps & cam straps

Ratchet straps and cam buckles are used to secure various types of cargo and come in various sizes from 1″ on up to 4″ widths.

The ratchet strap comes with many fittings: chain extensions, d-rings, e-track fitting, e-track double stud fitting, f-track hook and spring e-fitting, flat hook, flat snap hook, j-hook with d-ring, s-hook, and vinyl coated wire hooks.

Polyester webbing is used for cargo securement because of its low stretch rate. It’s also very abrasion-resistant.

How to thread a ratchet strap

To thread a ratchet strap, first open your ratchet a little bit so you have access to the take up spool. Now you slide the strap through the spool and bring it right back around on itself. At this point, pull on the strap to remove the excess slack. Once all the slack is removed you can start to ratchet to the tension you want, keeping the strap straight. Once you have reached your desired tension, lock the ratchet down in its closed position. To release the strap, open the ratchet all the way so it lays completely flat. Once it is flat, is in the release position. Go ahead and pull your strap out.

In some cases you may not need the strength of a ratchet strap. In those cases you would use a cam buckle.

Cam straps come with various fittings: butterfly fittings, e-track fittings, f-track hook and spring e-fittings, handlebar straps with s-hooks, flat snap hooks and s-hooks.

Cam buckles typically come in 1″ and 2″ sizes.

How to thread a cam buckle

To thread a cam buckle, turn the cam buckle over and feed the strap back through while pressing the thumb release. While pressing the thumb release, pull the strap to your desired tension, then release. To remove the strap, press the thumb button and simply pull the strap. You don’t have to pull the strap all the way out, just enough to get to your cargo.

In choosing between a ratchet strap and a cam buckle, it usually comes down to the working load limit, or how fragile the product is. If it is something light and fragile, choose a cam buckle since you’re not able to over-tension and possibly crush the product. If it’s anything heavier, less fragile, a ratchet strap is generally a better choice.