How to Use an Endless Ratchet Strap

image of endless ratchet strap

image of endless ratchet strapAn endless ratchet strap is designed to bundle or band items together, so it’s great for use on a pallet, moving dolly, etc.  Sometimes called “endless loop ratchet straps” or just an “endless strap,” they’re available in a variety of widths, lengths, and colors.

Because a ratchet can be tensioned tightly, it’s a good idea to add corner protectors if you’re strapping together loads that may have delicate or crushable edges. Another option to consider for more fragile loads is an endless cam buckle strap since a cam buckle cannot be over-tightened the same way a ratchet strap can.

1.) Feed the strap through the bottom of the pallet, keeping the strap going the same direction as the fork truck tines. This will prevent the strap from being damaged by the tines.

2.) Bring the loose end of the strap over the top of the pallet and feed the webbing onto the mandrel take up spool of the ratchet. Pull the extra webbing through so that the slack is out of the strap. Failure to perform this step will result in too much webbing being spooled onto the take-up spool and will cause it to jam before the strap is fully tightened. In severe cases you will damage the ratchet assembly and/or you will have to cut the webbing off.

3.) Place corner protectors as needed over the edges of the cargo. This is especially useful if you have cardboard boxes or fragile cargo that will cave in or break when the strap is tightened. Corner protectors are also good for protecting the strap from abrasive cargo such as bricks to increase their life expectancy.

4.) Once you’ve removed the extra slack from the strap, you can begin to ratchet it down to your desired tension.

For more information or to purchase products in this video, click on the links below:

 

One thought on “How to Use an Endless Ratchet Strap”

Comments are closed.